844-487-0065

Technical reference

DCS error-code

Decode DCS alerts by appliance family—understand what the panel is signaling and when to bring in a specialist.

Ice Maker Error Codes

DCS
DOOR
DOOR – Ice maker indicator
MEDIUM
The ice maker or dispenser interlock sees an open door or bin. Close the freezer or ice compartment fully, make sure the ice bin is seated, and clear ice bridges that hold the door ajar. If DOOR stays on with everything shut, switches, alignment, or wiring should be inspected.
View
OFF (flashing)
OFF (flashing) – Ice maker indicator
MEDIUM
Usually means ice production is turned off in software or the control has paused the icemaker. Check the on/off setting in the dispenser menu or UI, and confirm the bail arm or electronic switch is not in the off position. If OFF flashes when production should run, control or sensor input may be at fault.
View
ICE (flashing)
ICE (flashing) – Ice maker indicator
MEDIUM
Often calls attention to an ice maker fault—stuck harvest, long fill, or thermistor issues depending on series. Look for obvious jams with power off; verify water pressure meets manufacturer spec. Flashing ICE that continues after reset typically needs professional diagnostics.
View
All indicators flashing
All indicators flashing – Ice maker
HIGH
Represents a general fault or startup test failure on modular ice makers or dispenser panels. Unplug or switch off for one minute, then restore power once. If every indicator still flashes, the service module, optics, or supply voltage may need testing—avoid repeated power cycling.
View

Book your service window

Call the priority line or send a request—our team responds promptly during service hours so you can plan around life, not breakdowns.

844-487-0065

What to expect

  • A clear, written estimate before any major investment in labor or parts
  • Priority routing with same- and next-day windows across many areas
  • Technicians fluent in premium indoor, outdoor, and built-in installations
  • Confidence-backed coverage on qualifying repairs—details on every invoice

Service hours

Mon–Fri: 7am–8pm | Sat: 8am–6pm

Request a visit

Share a few details below—a coordinator will reach out shortly to confirm timing and next steps.